FEATURES AND CONTROLS
46
9. Throttle only/station select button - Allows the boat operator
to increase engine RPM for warm-up, without shifting the
engine into gear. To engage throttle only, move the control
handle into the neutral position. Press the throttle only button
while moving the control handle ahead to the forward detent.
The horn will sound once and the neutral light will start
flashing. The horn will sound twice when throttle only is
engaged. Advance throttle to increase engine RPM. To
disengage, return control handle to neutral position and press
the throttle only button. Engine RPM is limited to prevent
engine damage. Pressing the station select button at an
inactive helm initiates a helm transfer. Refer to
Helm
Transfer
.
d
b
a
c
e
5187
a -
Neutral LED
b -
Select button
c -
Arrow trackpad
d -
Throttle only/station
select button
e -
Active LED
HELM TRANSFER
!
WARNING
Avoid serious injury or death from loss of boat control. The boat
operator should never leave the active station while engine is in
gear. Helm transfer should only be attempted while both stations
are manned. One person helm transfer should only be performed
while engine is in neutral.
NOTE: Idle position is preferred when doing a helm transfer. If
conditions do not allow the remote control to be placed at idle
position, a helm transfer can be done while in gear.
Summary of Contents for 200 VERADO
Page 4: ...iv ...
