manualshive.com logo in svg

Mercury 1998 Mystique, Owner'S Manual

The Mercury 1998 Mystique Owner's Manual is an essential guide for any Mystique owner. Our website offers a convenient and hassle-free way to download this manual for free. Discover in-depth instructions, helpful tips, and detailed specifications to maximize your Mercury Mystique experience. Download your manual today at manualshive.com.

Share
Download
background image

Maintenance and care

147

Checking wiper blades

Check the wiper blades on your
vehicle for roughness by running
the tips of your fingers over the
edge of the blade.

Traces of grease, silicone and fuel
prevent wiper blades from
functioning properly. We
recommend Ford cleaning
solutions or equivalent to clean
wiper blades.

Change the wiper blades on your
vehicle at least once a year.

Cabin air filter replacement

In your climate control system, you
have a filter that cleans the air
before it enters the interior of the
vehicle. This filter should be
replaced at the intervals in the
”Maintenance Schedule” booklet.

To replace the cabin air filter:

1. Remove both windshield wiper
arms. With the wiper arm in the
horizontal position, lift the arm
away from the windshield while
pulling the retaining clip at the
base toward the windshield.
Release the wiper arm, then lift it
off the base.

CDW VA1-19Maint en MM  5/15/97 7:56 PM  Page 147

Summary of Contents for 1998 Mystique






































































































































































































Reviews:

No comments

Related manuals for 1998 Mystique

Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Brand: Cadillac Pages: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Brand: Cadillac Pages: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Brand: Cadillac Pages: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Brand: Cadillac Pages: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Brand: Cadillac Pages: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Brand: Cadillac Pages: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Brand: Cadillac Pages: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Brand: Cadillac Pages: 438
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Audiovox UniStreamONE Installation Manual preview
UniStreamONE
Brand: Audiovox Pages: 24
Mercedes-Benz GLE Coupe Brief Overview preview
GLE Coupe
Brand: Mercedes-Benz Pages: 2
Westin 25-0560 Instructions preview
25-0560
Brand: Westin Pages: 2
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412

Brands by name

Popular brands

Load more brands