manualshive.com logo in svg

Mercury 1998 Mystique, Owner'S Manual

The Mercury 1998 Mystique Owner's Manual is an essential guide for any Mystique owner. Our website offers a convenient and hassle-free way to download this manual for free. Discover in-depth instructions, helpful tips, and detailed specifications to maximize your Mercury Mystique experience. Download your manual today at manualshive.com.

Share
Download
background image

Maintenance and care

135

Brake/clutch fluid reservoir

Brake and clutch fluid systems are
supplied from the same reservoir.

The level of the fluid must lie
between the MIN and MAX marks
on the side of the reservoir. If the
level falls below the MIN mark, the
brake fluid level warning light on
the instrument panel will
illuminate. Add only brake fluid
that meets the Ford specification
(see the chapter 

Capacities and

specifications

).

MAX

MIN

Brake fluid is toxic.

BRAKE

If you use a  brake fluid that
is not DOT 3, you will cause

permanent damage to your brakes.

Do not let the reservoir for
the master cylinder run dry.

This may cause the brakes to fail.

Windshield washer system 

If necessary, add enough washer
fluid to fill the reservoir. Follow the
instructions on the washer fluid
label.

Do not put engine coolant in
the container for the

windshield washer fluid.

CDW VA1-19Maint en MM  5/15/97 7:55 PM  Page 135

Summary of Contents for 1998 Mystique






































































































































































































Reviews:

No comments

Related manuals for 1998 Mystique

Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14
Acura 2011 RDX Navigation System Advanced Technology Manual preview
2011 RDX Navigation System
Brand: Acura Pages: 16
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
PERODUA Aruz 2019 Quick User Manual preview
Aruz 2019
Brand: PERODUA Pages: 43
Wald Black Bison Sports Series Installation Manual preview
Black Bison Sports Series
Brand: Wald Pages: 7
MovaNext Bike adapter 3 Assembly Instructions preview
Bike adapter 3
Brand: MovaNext Pages: 4
Prorack K443 Fitting Instructions Manual preview
K443
Brand: Prorack Pages: 14
FACTORY UTV Dual Clamp Spare Tire Mount Installation Manual preview
Dual Clamp Spare Tire Mount
Brand: FACTORY UTV Pages: 2
Subaru 2001 Forester Service Manual preview
2001 Forester
Brand: Subaru Pages: 9

Brands by name

Popular brands

Load more brands