manualshive.com logo in svg

Mercury 1998 Mystique, Owner'S Manual

The Mercury 1998 Mystique Owner's Manual is an essential guide for any Mystique owner. Our website offers a convenient and hassle-free way to download this manual for free. Discover in-depth instructions, helpful tips, and detailed specifications to maximize your Mercury Mystique experience. Download your manual today at manualshive.com.

Share
Download
background image

Instrumentation

9

Front foglamps

Illuminates when foglamps are
switched on.

Refer to 

Foglamps control

in the

Controls and features 

chapter for

notes on use.

CHECK

ENGINE

Brake system warning light

Extinguishes when the parking
brake is released. Illuminates after
releasing the parking brake to
indicate low brake fluid level.

Anti-lock brake system (ABS) 
(if equipped)

Momentarily illuminates when the
ignition is turned on and the engine
is off. If the light stays on or
continues to flash, the ABS needs
to be serviced.

Engine oil pressure

Briefly illuminates when the
ignition is turned on and the engine
is off. The light also illuminates
when engine oil pressure has been
lost. Refer to the 

Maintenance

and care

chapter to check the

engine oil level as soon as possible.
If the engine oil level is correct and
the light stays on, see your dealer
or qualified service technician.

BRAKE

BRAKE

BRAKE

CDW IIA2Instrum_en MM  5/15/97 7:43 PM  Page 9

Summary of Contents for 1998 Mystique






































































































































































































Reviews:

No comments

Related manuals for 1998 Mystique

Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
SAN HIMA SGBR015 Installation Instructions Manual preview
SGBR015
Brand: SAN HIMA Pages: 10
Streetwize SWGH3 Quick Start Manual preview
SWGH3
Brand: Streetwize Pages: 4
Honda 2007 Fit User Information preview
2007 Fit
Brand: Honda Pages: 24
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1
Mazda 323F Owner'S Manual preview
323F
Brand: Mazda Pages: 196
Skoda Octavia 2007 Owner'S Manual preview
Octavia 2007
Brand: Skoda Pages: 288
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
VDO ELECTRONIC SPEEDOMETER 1323 Datasheet preview
ELECTRONIC SPEEDOMETER 1323
Brand: VDO Pages: 2

Brands by name

Popular brands

Load more brands