Mercury 1997 Cougar Manual Download Page 84 | Manualshive

Page: 84 / 308

background image

82

*

[CF32700( ALL)05/96]

Speed control cannot reduce the vehicle speed if
it increases above the set speed on a downhill. If
your vehicle speed is faster than the set speed
while driving on a downhill in

j

(Overdrive),

you may want to shift to the next lower gear to
reduce your vehicle’s speed.

[CF32800( ALL)05/96]

If your vehicle slows down more than 10 mph
(16 km/h) below your set speed on an uphill,
your speed control will disengage. This is
normal. Pressing RESUME will re-engage it.

[CF32850( BCGV)05/96]

If your vehicle slows down more than 10 mph
(16 km/h) below your set speed on an uphill,
your speed control will disengage. This is
normal. Pressing RESUME will re-engage it.

*

[CF32900( ALL)05/96]

R

WARNING

To keep your vehicle under control, do
not use speed control in heavy traffic or
on roads that are winding, slippery, or
unpaved.

*

[CF33000( ALL)05/96]

To Set a Higher Set Speed

*

[CF33100( ALL)05/96]

❑

Press and hold SET ACCEL. Release the
switch when the desired vehicle speed is
reached. OR

*

[CF33200( ALL)05/96]

❑

Press and release SET ACCEL. Each press
will increase the set speed by 1 mph
(1.6 km/h). OR

*

[CF33300( ALL)05/96]

❑

Accelerate with your accelerator pedal, then
press SET ACCEL.

*

[CF33400( ALL)05/96]

You may accelerate with the accelerator pedal at
any time during speed control usage. Releasing
the accelerator pedal will return your vehicle
speed to the previously programmed set speed.

File:05rccfc.ex

Update:Fri Jun 7 13:58:04 1996

«
...
82
83
84
85
86
...
»

Summary of Contents for 1997 Cougar





















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Cougar

Brand: VEAP SHIELD UNITED Pages: 3

Brand: Carax Pages: 2

Brand: Van Guard Pages: 3

Brand: TATA Motors Pages: 136

Tata Indigo Diesel

Brand: TATA Motors Pages: 190

Prime Design HBR-E-FT33B

Brand: Safe Fleet Pages: 12

Brand: Prorack Pages: 20

Brand: Kia Pages: 51

PRIME DESIGN URX-001-E

Brand: Safe Fleet Pages: 8

Brand: Radical Sportscars Pages: 44

Brand: Sanitas Pages: 36

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Brand: EUFAB Pages: 4

nERGY ETSA200R-PA

Brand: Soundoff Signal Pages: 3

Brand: Truma Pages: 10

2000 Accord Sedan

Brand: Honda Pages: 320

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands