Mercury 1997 Cougar Manual Download Page 117 | Manualshive

Page: 117 / 308

background image

115

*

[SS18200( BC )05/96]

To fasten a cinch tongue, pull the combination
lap and shoulder belt from the retractor so that
the shoulder belt portion of the safety belt
crosses your shoulder and chest. Be sure the belt
is not twisted. If the belt is twisted remove the
twist. Insert the belt tongue into the proper
buckle for your seating position until you hear a
snap and feel it latch. Make sure the tongue is
securely fastened to the buckle by pulling on the
tongue.

*

[SS18300( ALL)05/96]

R

WARNING

The lap belts should fit snugly and as low
as possible around the hips, not around
the waist.

*

[SS18400( BCGV)05/96]

R

WARNING

Front and rear seat occupants, including
pregnant women, should wear safety belts
for optimum protection in an accident.

*

[SS18500( ALL)05/96]

R

WARNING

Each seating position in your vehicle has a
specific safety belt assembly which is
made up of one buckle and one tongue
that are designed to be used as a pair. 1)
Use the shoulder belt on the outside
shoulder only. Never wear the shoulder
belt under the arm. 2) Never swing it
around your neck over the inside
shoulder. 3) Never use a single belt for
more than one person.

*

[SS18600( BC )01/96]

Due to folding rear seats, sometimes the buckles
and tongues toward the center of the vehicle
may be hidden by the rear edge of the seat
cushion. Pull them out so they will be accessible.

File:06rcssc.ex

Update:Fri Jun 7 13:59:45 1996

«
...
115
116
117
118
119
...
»

Summary of Contents for 1997 Cougar





















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Cougar

Brand: AAMP of America Pages: 6

Brand: Uebler Pages: 18

Brand: Doug Thorley Headers Pages: 5

Brand: Edelbrock Pages: 2

Brand: Jaeger Pages: 17

Brand: Flash Cover Pages: 2

Brand: Icom Pages: 20

Brand: Sears Pages: 41

Brand: Mercedes-Benz Pages: 358

Brand: Kargo Master Pages: 19

PRIME DESIGN VBR3-FT31B

Brand: Safe Fleet Pages: 12

Brand: Subaru Pages: 19

Brand: Kia Pages: 680

2917 Nstallation

Brand: Edelbrock Pages: 1

Brand: GYS Pages: 32

Brand: Volvo Pages: 92

EQ forfour 2018

Brand: SMART Pages: 224

BLADE-AL-HK4-EN

Brand: iDataLink Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands