Mercury 1996 Grand Marquis Manual Download Page 286

Page: 286 / 329

284

% [SV48900( BCGV)06/94]

To remove the high-mount brakelamp:

[SV49400( GV)06/94]

Remove the two retaining screws with a
Phillips screwdriver.

[SV49800( GV)10/90]

Then lift the whole assembly up and over
the retaining brackets. Do not move upper
part of plastic attachment brackets.

[SV50010( GV)06/94]

Twist socket counterclockwise to remove
from lamp.

[SV50020( GV)06/94]

Pull bulb out of socket.

[SV50250( GV)06/94]

Replace the burned out bulbs.

[SV50300( BCGV)02/95]

To install the high-mount brakelamp:

[SV50600( GV)10/90]

Position the brakelamp over the retaining
brackets.

[SV50900( GV)01/89]

Install and tighten the two retaining screws.

File:rcsvg.ex

Update:Wed Jun 28 16:19:38 1995

Summary of Contents for 1996 Grand Marquis










































































































































































































































































































































Search results

Summary of Contents for 1996 Grand Marquis

Reviews:

Related manuals for 1996 Grand Marquis

Brands by name

Popular brands

Mercury 1996 Grand Marquis, Manual

Search results

Summary of Contents for 1996 Grand Marquis

Reviews:

Related manuals for 1996 Grand Marquis

Brands by name

Popular brands