Mercury 1996 Grand Marquis Manual Download Page 204 | Manualshive

Page: 204 / 329

background image

201

*

[RE04400( ALL)01/95]

When you drive with the temporary spare tire,
DO NOT:

*

[RE04500( ALL)01/95]

❑

exceed 50 mph (80 km/h) under any
circumstances.

*

[RE04600( ALL)01/95]

❑

load your vehicle so that it is heavier than
the maximum vehicle load rating listed on
the tire decal.

*

[RE04700( ALL)01/95]

❑

tow a trailer.

*

[RE04800( ALL)01/95]

❑

use tire chains on this tire.

*

[RE04900( ALL)01/95]

❑

try to repair the temporary spare tire or
remove it from its wheel.

*

[RE05000( ALL)01/95]

❑

use the wheel for any other type of vehicle.

*

[RE05100( ALL)01/95]

❑

drive through an automatic car wash with
this tire. Because the temporary spare tire is
smaller than a conventional tire, it reduces
the ground clearance. Your vehicle may get
caught in the rails and it could be damaged.

% [RE05200( GV)11/94]

Using the Conventional Spare Tire
(If equipped)

*

[RE05300( GV)01/95]

If you have the conventional spare tire, you can
use it as a spare or as a regular tire. This spare
tire is identical to the other tires that come with
your vehicle, although the wheel may not match.

File:rcreg.ex

Update:Thu Feb 1 08:33:27 1996

«
...
202
203
204
205
206
...
»

Summary of Contents for 1996 Grand Marquis










































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Grand Marquis

Brand: Jeep Pages: 6

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 2

Brand: Cadillac Pages: 494

Brand: Cadillac Pages: 500

Brand: Cadillac Pages: 40

Brand: Cadillac Pages: 432

Brand: Cadillac Pages: 338

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: UltraGauge Pages: 55

Brand: Rati Pages: 2

Brand: Draw tite Pages: 4

Brand: Mercedes-Benz Pages: 329

Brand: AA Products Pages: 6

Brand: Improved Racing Pages: 17

Brand: ULTIMATE SPEED Pages: 34

Brand: Alphasonik Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands