Mercury 1996 Grand Marquis Manual Download Page 210 | Manualshive

Page: 210 / 329

background image

207

[RE08915( GV)01/96]

3.

If you are replacing the front tire (with
aluminum wheels) with the temporary spare
tire, you need to remove the black dust
shield. Gently pull the shield over the rubber
o-rings and slide it off the wheel studs.
Because the rubber o-rings are soft, they
should pass through the holes in the shield.
If the rings do not pass through the holes,
remove them from the wheel studs. Save the
black dust shield for future use, and ensure
the rubber o-rings are removed from wheel
studs.

*

[RE08925( GV)01/96]

4.

Replace the flat tire with the spare tire,
making sure that the air valve stem is facing
outward.

*

[RE08945( GV)01/96]

5.

Reinstall the lug nuts, tightening until the
wheel is snug against the hub. The beveled
edges on the lug nuts face inward. Do not
fully tighten the lug nuts until you lower the
vehicle. If you do, you could force the
vehicle off the jack.

*

[RE08965( GV)01/96]

6.

Lower the vehicle by turning the jack handle
counterclockwise.

*

[RE08985( GV)01/96]

7.

Remove the jack and fully tighten the lug
nuts in the order shown in the following
illustration. As soon as possible, have your
dealer or a qualified service technician check
the lug nuts for proper torque specifications.

% [RE09100( ALL)03/93]

quarter page art:0010350-A

The lug nuts on the wheel

File:rcreg.ex

Update:Thu Feb 1 08:33:27 1996

«
...
208
209
210
211
212
...
»

Summary of Contents for 1996 Grand Marquis










































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Grand Marquis

Brand: Dakota Digital Pages: 2

Brand: Dakota Digital Pages: 7

Brand: VanEssa mobilcamping Pages: 8

Brand: Ignition Pages: 1

PERFECTVIEW CAM80AHD

Brand: Dometic Pages: 196

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: Kolpin Outdoors Pages: 6

Brand: Schartec Pages: 2

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Volvo Pages: 10

Brand: Axxess Pages: 8

Brand: Dodge Pages: 276

2005 JR41 Stratus

Brand: Dodge Pages: 293

2010 Challenger SRT

Brand: Dodge Pages: 444

Brand: S&B Filters Pages: 4

Brand: Mazda Pages: 3

Brand: BraunAbility Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands