MerCruiser Black Scorpion User Manual Download Page 51 | Manualshive

Page: 51 / 106

background image

Section 4 - Specifications

90-865253070 JUNE 2007

Page 43

IMPORTANT: When operating a Mercury MerCruiser engine on gasoline containing

alcohol, storage of gasoline in the fuel tank for long periods should be avoided. Long

periods of storage, common to boats, create unique problems. In cars alcohol‑blend fuels

normally are consumed before they can absorb enough moisture to cause trouble, but

boats often sit idle long enough for phase separation to take place. In addition, internal

corrosion may take place during storage if alcohol has washed protective oil films from

internal components.

Engine Oil

To help obtain optimum engine performance and to provide maximum protection, we

strongly recommend the use of the following oils listed in the order of recommendation:
1. MerCruiser / Quicksilver Synthetic Blend, NMMA FC‑W rated, 4 cycle oil.
2. MerCruiser / Quicksilver 25W40 NMMA FC‑W rated oil.
3. A NMMA FC‑W rated oil.
4. MerCruiser / Quicksilver 4‑cycle 25W40, non FC‑W rated oil.
5. A good grade straight weight detergent automotive oil per the operating chart below.

NOTE: The use of non‑detergent oils, multi‑viscosity oils (other than as specified), non

FC‑W rated synthetic oils, low quality oils or oils that contain solid additives are specifically

not recommended.

MerCruiser/ Quicksilver Synthetic Blend, NMMA FC-W rated, 4-cycle oil

MerCruiser / Quicksilver 25W40 NMMA FC-W rated oil

A NMMA FC-W rated oil

MerCruiser / Quicksilver 4-cycle 25W40, non FC-W rated oil

SAE 20W

SAE30W

SAE40W

AIR TEMPERATURE

ORDER OF PREFERENCE

32° F
0° C

50° F
10° C

8082

«
...
49
50
51
52
53
...
»

Summary of Contents for Black Scorpion











































































































Reviews:

No comments

Related manuals for Black Scorpion

VLT AutomationDrive FC 300 Series

Brand: Danfoss Pages: 56

Brand: Danfoss Pages: 2

Brand: Garmin Pages: 14

Brand: Navistar Pages: 197

Vanguard 290000

Brand: Briggs & Stratton Pages: 68

Brand: SOMFY Pages: 2

Brand: Ecofly Pages: 20

90000 I/C 525 Series

Brand: Briggs & Stratton Pages: 16

Brand: Daedong Pages: 66

290000 Vanguardv Gasoline

Brand: Briggs & Stratton Pages: 13

Brand: LAMBERT Pages: 24

Brand: Northern Lights Pages: 36

Brand: Northern Lights Pages: 45

Brand: Northern Lights Pages: 56

Brand: Hatz Pages: 94

Brand: FUTABA Pages: 3

Brand: Dato Pages: 9

A50-10L Turnado

Brand: Hacker Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands