Free Standing
Bulb Warmer Service Manual
7
INSTALLATION
1. Check the specification data plate located on the control panel for the correct model number, voltage and
wattage.
2. Check to insure that the electric circuit being used to supply electricity to the unit has a sufficient amerage
rating.
3. Use the correct NEMA receptacle that corresponds to the plug provided on the unit.
4. Place unit on a flat and level surface.
5. Insert the NEMA plug into the proper NEMA receptacle.
WIRING DIAGRAMS
B-1
B-2
B-3
250 W INFRARED
HEAT LAMP
250 W INFRARED
HEAT LAMP
WIRING DIAGRAM
120V, 208, 240V
250 WATT LAMPS
!
CAUTION: DISCONNECT POWER WHEN SERVICING OR REPLACING!