Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P5
Step 4
Parts needed - &
Attach the Plain Gable
(No. 2)
to a Window
Side
(No. 3)
.
Fix the corners with 3x50mm screws as shown
in the diagram.
Do not secure the building to the floor
until after the roof has been fitted.
Position the panels so there are equal gaps
between the floor and cladding.
3x50mm screws.
50mm
screw
2
3
2
3
Step 5
Parts needed - &
Attach the Door Gable
(No. 1)
to
the remianing Window Side
(No. 3)
with 6x50mm screws.
Position the panels so there are
equal gaps between the floor and
cladding. Fix the corners with
3 x 50mm screws as in the
diagram.
Do not secure the building to
the floor until after the roof has
been fitted.
9x50mm screws.
50mm
screw
1
3
1
3
Step 6
Parts needed - & x2
Place the Ridge Bar
(No. 8)
in
between the front and back
panels. Ensure the top corners of
the Ridge Bar are flush with each
top point as shown.
Secure in place using a Corner
Brace
(No. 18)
on each end using
4x30mm screws per brace.
8x30mm screws.
30mm
screw
18
8
18
8
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
