P 7
Please retain product label and instructions for future reference
Step 6
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame
(No.
2)
over the boards resting the frame
on top of the starter board.
*Please note:
This image is for illustra-
tive purposes and may differ from your
choice in product (
regarding door
position
). Nevertheless the process of
fitting the door frame is the same.
**Please Note:
The short boards at the
front of the building (either side of the
door and window opening’s) can be
placed either side depending on your
needs.
22
22
Step 9
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 6
No. 10 QTY 12
No. 11 QTY 6
No. 12 QTY 6
No. 22 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the remaining boards (
No’s. 4, 5,
10, 11, 12 & 22
) onto the
assembly to bring the board
level to the top of the window
and door frames.
Please note when you get to
the top of the boards the right
hand boards will be slightly
lower.
**Ensure that the boards are
level and flush with each
other as you lay each one.
Step 7
(See Pre-Assembly)
Parts needed - No. 4 QTY 6
No. 5 QTY 6
No. 10 QTY 12
No. 11 QTY 6
No. 12 QTY 6
No. 22 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (
No’s. 4, 5, 10,
11, 12 & 22
) onto the
assembly to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
Step 8
Once you have laid the second
level of boards onto the assembly
slide the window(
s
)
(No. 1)
between the
smaller boards and rest on to the
longer board.
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may
differ from your choice in product
(
regarding window position
).
Nevertheless the process of fitting
the window is the same.
5
4
10
10
11
22
22
5
4
10
10
12
11
12
