Please retain product label and instructions for future reference
Step 14
Parts needed - No. 24 QTY 14
No. 26 QTY 14
No. 27 QTY 14
No. 28 QTY 7
Following the method shown in
the illustration, lay the remaining
boards (
No. 24, 26, 27, & 28
)
onto the assembly to bring the
board level to the top of the
window and door frames.
*Ensure that the boards are
level and flush with each other
as you lay each one.
28
24
24
27
26
26
Rubber Mallet
may be required
to fit parts.
27
28
29
30
Step 15
Parts needed - No. 28 QTY 1
No. 29 QTY 2
No. 30 QTY 1
Following the method shown in
the illustration, lay next boards
(
No. 28 & 30
)
onto the front and
back of the log cabin. Once in
position place the last 2 log
boards (
No.29
) onto the plain
sides, fixing into position by
screwing through the notches as
shown in the illustration.
*Ensure that the boards are level
and flush with each other as you
lay each one.
4x70mm Screws
Pre drill
hole
70mm
screw
29
IMPORTANT :
Pre-drill before fixing screws.
Rubber Mallet
may be required
to fit parts.
22
22
Pre drill
hole
70mm
screw
IMPORTANT:
Pre-drill before fixing screws.
Step 16
Parts needed - No. 22 QTY 2
Place the gable tops
(No. 22)
onto the log cabin. Fix into
position by screwing through
the notches as shown in the
illustration.
*Ensure that the boards are
level and flush with each other
as you lay each one.
4x70mm Screws
Rubber Mallet
may be required
to fit parts.
P 9
