P 9
Please retain product label and instructions for future reference
Step 13
Part needed - No. 24 QTY 12
No. 25 QTY 6
No. 27 QTY 6
No. 28 QTY 6
No. 30 QTY 2
No. 31 QTY 2
No. 32 QTY 2
Following the method shown
in the illustration, lay the next
layer of boards (
No’s. 24, 25,
27, 28, 30, 31 & 32)
onto the
log cabin, ensuring to create a
staggered overhang at the
front of the log cabin.
*Ensure that the boards are
level and flush with each
other as you lay each one.
25
28
24
24
27
27
30
32
31
30
32
31
Rubber Mallet
may be required
to fit parts.
Step 14
Parts needed - No. 28 QTY 1
No. 29 QTY 2
No. 43 QTY 1
Lay the last two boards
(No’s.
28 & 43)
onto the front and
back of the log cabin.
Once in position place log
board
(No. 29)
onto the top of
the overhang, fixing into
position by screwing through
the notches as shown in the
illustration.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
70mm
screw
29
28
43
29
IMPORTANT :
Pre-drill before fixing screws.
Rubber Mallet
may be required
to fit parts.
Step 15
Parts needed - No. 22 QTY 2
Place the gable tops
(No. 22)
onto the log cabin. Fix into
position by screwing through
the notches as shown in the
illustration.
*Ensure that the boards are
level and flush with each
other as you lay each one.
4x70mm Screws
70mm
screw
22
IMPORTANT :
Pre-drill before fixing screws.
22
Pre drill
hole
Rubber Mallet
may be required
to fit parts.
