P 21
Fit the Cover Trims to the left
and right of the building and
over the panel joins as shown
in the illustration using 30mm
screws. Trim the length of the
cover trims to the required
size before fitting if necessary.
Pre drill to avoid splitting.
18x30mm Screws
Step 12
16
16
30mm
screw
Pre drill
hole
16
16
16
16
Step 13
16x40mm Screws
Attach the faiscas to the roof
leaving a slight overhang at the
top.
Fit the fascias to the roof over
the felt and secure in place with
40mm screws as shown.
Pre drill to avoid splitting.
Pre drill
hole
15
40mm
screw
15
18
18
15
15
Please retain product label and instructions for future reference
Step 14
Fit the window into the
opening on the door panel and
fix in place with 6x 20mm
screws, ensure to screw
through the window frame into
the panel framing.
20mm
screw
Pre drill
hole
6x20mm Screws
19
14
Step 15
Use 4x30mm screws to fix
each beading strip onto the
door panel. Ensure that the
screw is parallel with the
door frame when fixing the
strip to the door panel as
shown in the close up view.
Line up the door block as
shown in the illustration.
Then fix with 2x30mm
screws by screwing through
the outside of the door into
the block.
10x30mm Screws
Pre drill
hole
30mm
screw
30mm
screw
17
13
Pre drill
hole
