P 7
Pre drill
hole
20mm
screw
Step 20
Fix the casement stay to the
window then align the fixings
to the window panel.
*Ensure the casement stay fits
onto the fixings before securing
in place.
12x20mm Screws
26
Step 19
To fix the lock in place. Screw the Staple
to the Door Gable or Slave door.
Making sure the Hasp is in line with
the staple and screw into the Door or
Master door.
To lock the Door, place the Hasp over the
Staple and twist into the lock position as
shown.
8x30mm screws.
Pre drill
hole
30mm
screw
21
30mm
screw
Step 21
Attach the turn buttons to the top
and bottom of the slave door using
1x30mm black screw per turn
button.
*Ensuring the turn buttons catch
the master door.
2x30mm Black Screws
These Turn buttons help to keep
your doors straight during high
and low levels of moisture
content in the air.
30mm
screw
Pre drill
hole
24
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
Please retain product label and instructions for future reference
30mm
screw
Pre drill
hole
19
Step 18
Place the Cloaking Strip to the
rear of one of the doors. Fixing in
position screwing through the door
into the cloaking strip with 3x30mm
screws.
Align the tower bolts onto the
vertical framing of the slave
door, secure the bolts to the
top and bottom using 6x30mm
black screws per tower bolt.
Mark the position of the bolt
& drill a hole above and below
for the bolt to catch in to.
12x30mm Black Screws
3x30mm Screws
23
11
