Step 9
Place the assembled roof panels
on to the building and secure as
shown in the illustration with
16x30mm screws
* Ensure the joints in the roof
sheets sit over the roof bars
and are supported.
16x30mm Screws
Pre drill
hole
30mm
screw
a
a
a
a
a
a
a
Step 10
Secure the building to the
floor using 28x50mm screws.
*Ensure to screw through the framing
into the floor bearers.
28x50mm Screws
Pre drill
hole
50mm
screw
a
Step 11
Cut the felt into 3 sheets and lay
onto the roof.
* Ensure there is approximately
50mm of overhang around the
building.
Fix into place using 219x felt tacks
at 100mm intervals.
219xFelt Tacks
Felt
tacks
Felt size: 4390mm
18
18
18
18
Step 12
Measure the side of the roof,
cut 2x (
No.18)
facias to size and fix in
place using 3x30mm screws.
Measure the distance between
the 2 facias at the front of the
building & cut 2x (
No. 18)
facias to match
the gap. Secure to the building
using 6x30mm screws.
12x30mm Screws
Cut down to fit
Pre drill
hole
30mm
screw
a
*If you have purchased the T&G roof and floor option ensure to fix the roof to
the building using 35x70mm screws following the same method outlined
above.
Internally
: Secure the roof panels together where they join using 5x50mm screws.
35x70mm Screws
5x50mm Screws
Pre drill
hole
70mm
screw
50mm
screw
1.
2.
3.
P 5
Please retain product label and instructions for future reference
HANDLE
WITH CARE
1
2
3
4
