27
24
23
Step 6
Attach the door trims to the
top and bottom of one door.
Making sure the trims overlap
the opposite door, fix in place
with 5x20mm screws as shown
in the illustration.
Secure a turn button to one door
inbetween the two trims using
1x30mm black screw.
5x20mm Screws
1x30mm Black Screw
30mm
screw
20mm
screw
Pre drill
hole
27
13
Step 7
Fix the door blocks to back
of the door using 2x30mm
screws per block.
Attach 1x turn button to
each block using 1x30mm
black screws per turn
button.
Ensure the doors open
freely and can be locked
with the turn buttons
4x30mm Screws
2x30mm Black Screw
30mm
screw
30mm
screw
Pre drill
hole
12
9
Step 8
Place the door panel onto
the floor.
Secure the panel to the
the window & plain panel
using 6x50mm screws.
Do NOT screw the building
to the floor until the roof
is fitted.
6x50mm Screws
50mm
screw
Pre drill
hole
Roof support must be
level with top of framing
Step 9
Position the larger roof support bar
in the centre of the building, between
the left and right corners.
Ensure the roof support bar is level
with the top of the building and mark
the position with a pencil below the
framing for the support blocks.
Align the roof support blocks with the
marked position and secure to the
framing using 2x80mm screws per
block.
4x80mm Screws
80mm
screw
Pre drill
hole
P 4
Please retain product label and instructions for future reference
