Starter switch positions
72
Starter switch positions
G
Starter switch
}
For removing SmartKey (gear selector
lever must be in park position
P)
$
Power supply for some electrical
consumers, e.g. radio
%
Ignition (power supply for all electrical
consumers) and driving position
&
Starting position
When you switch on the ignition, all lamps
(except high-beam headlamp indicator lamp,
and turn signal indicator lamps unless
activated) in the instrument cluster come on.
If a lamp in the instrument cluster fails to
come on when the ignition is switched on,
have it checked and replaced if necessary. If
a lamp in the instrument cluster remains on
after starting the engine or comes on while
driving, refer to “Lamps in instrument cluster”
(
!
If the SmartKey cannot be turned in the
starter switch, the vehicle battery may not
be sufficiently charged.
R
Check the vehicle battery and charge it
if necessary.
R
Get a jump start.
Always remove the SmartKey from the
starter switch when the engine is not in
operation. This will help to prevent
accelerated vehicle battery discharge or a
completely discharged vehicle battery.
G
Your vehicle comes supplied with a SmartKey
with integrated KEYLESS-GO function.
With the SmartKey present in the vehicle,
pressing the KEYLESS-GO start/stop button
R
without the brake pedal depressed
corresponds to the various starter switch
positions (
R
with the brake pedal firmly depressed will
start the engine (
The SmartKey must be located in the vehicle.
X
Make sure the automatic transmission is in
park position
P.
X
Do not depress the brake pedal.
Controls in detail
230_AKB; 1; 42, en-US
d2ureepe,
Version: 2.11.7.1
2008-11-27T15:37:19+01:00 - Seite 72
