Flat tire
253
X
Stick TIREFIT container
1
upside down
into notch
2
of the electric air pump.
8
Filler hose
9
Tire valve
X
Unscrew the valve cap of the damaged tire
from tire valve
9
.
Version 1
a
Vent screw
b
Pressure gauge
X
Version 1 only: Close vent screw
a
on
pressure gauge
b
.
X
Screw filler hose
8
onto tire valve
9
.
X
Insert electrical plug
4
into the cigarette
X
Turn the SmartKey in the starter switch to
position
1.
or
X
KEYLESS-GO: Press the KEYLESS-GO
start/stop button once. Do not depress the
brake pedal.
X
Press
I on electric air pump switch
3
.
The electric air pump is switched on and
inflates the tire.
i
First, the sealing is pumped into the tire.
The pressure may briefly rise to up to 73 psi
(5 bar). This is normal and not an indication
of a malfunction.
Do not switch off the
electric air pump.
X
Let the electric air pump inflate the tire for
approximately 5 minutes.
The pressure gauge must display at least
26 psi (1.8 bar).
The air hose can become hot during
inflation. Please exercise appropriate
caution.
!
Do not operate the electric air pump
longer than 6 minutes without interruption.
Otherwise it may overheat.
You may operate the air pump again after
it has cooled off.
If the tire inflation pressure of at least
26 psi (1.8 bar) is not attained:
X
Turn off the electric air pump by pressing
0 on electric air pump switch
3
.
X
Detach filler hose
8
from tire valve
9
.
Practical hints
230_AKB; 1; 42, en-US
d2ureepe,
Version: 2.11.7.1
2008-11-27T15:37:19+01:00 - Seite 253
Z