Mercedes-Benz S-Class Coupe, Owner'S Manual

Page: 342 / 413

Checking the oil level using the on-board computer (S 65 AMG)
X
Make sure that the key is in position 2 in the ignition lock.
X
Use ò on the steering wheel to call up the list of menus.
X
Press the : or 9 button on the steering wheel to select the Service Service menu.
X
Confirm by pressing a on the steering wheel.
X
Use : or 9 to select the Engine oil level: Engine oil level: submenu.
X
Press a to confirm the selection.
The Engine Engine oil oil level level Measuring Measuring now now Measurement Measurement accurate accurate only only if if vehicle vehicle is is
level level message appears in the multifunction display.
The measurement takes a few seconds. You will see one of the following messages in the
multifunction display:
Display messages Possible causes/consequences and M M Solutions
Engine Engine oil oil level level OK OK
The oil level is correct.
Add Add 11 litre litre engine engine
oil oil when when next next refu‐ refu‐
elling elling
The oil level is too low.
X
Top up 1.0 litre of engine oil.
Engine oil level Engine oil level
Reduce oil level Reduce oil level
The engine oil level is too high.
X
Have excess engine oil siphoned off.
For engine oil For engine oil
level level turn turn on on igni‐ igni‐
tion tion
The ignition is switched off.
X
Turn the key to position 2 in the ignition lock.
Waiting Waiting period period for for
engine oil level engine oil level
not observed not observed
The required waiting period was not observed.
X
If the engine is at normal operating temperature: repeat the
measurement after about five minutes.
If the engine is not at normal operating temperature, e.g. if the
engine was only started briefly: repeat the measurement after
approximately 30 minutes.
Engine oil level Engine oil level
Not with the Not with the
engine running engine running
The engine is running; oil level measurement is not possible.
X
Switch off the engine.
X
If the engine is at normal operating temperature: wait about five
minutes before carrying out the measurement.
If the engine is not at normal operating temperature, e.g. if the
engine was only started briefly: wait approximately 30 minutes
before carrying out the measurement.
Engine compartment
339
Ma
int
enance
and
car
e
Z