Mercedes-Benz S-Class Coupe, Owner'S Manual

Page: 123 / 413

Using the memory button
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
This setting can be stored using memory but-
ton M : .
X
Turn the key to position 2 in the ignition
lock (
Y
page 159).
X
Press button = for the exterior mirror on
the front-passenger side.
X
Use adjustment button ; to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the kerb.
X
Press memory button M : and one of the
arrows on adjustment button ; within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position set-
ting
X
Turn the key to position 2 in the ignition
lock (
Y
page 159).
X
Adjust the exterior mirror on the front-
passenger side using button = .
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of
15 km/h
R
about ten seconds after you have disen-
gaged reverse gear
R
if you press button ? for the exterior mir-
ror on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, the adjustments could
cause you to lose control of the vehicle. There
is a risk of an accident.
Only use the memory function on the driver's
side while the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
If children activate the memory function, they
could become trapped, especially if they are
unattended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
seat, backrest, head restraint position and
contour of the backrest in the lumbar
region
R
active multicontour seat: side bolsters of
the backrest, shoulder of the backrest, con-
tour of the backrest, dynamic function level
120
Memory function
Seat
s,
steering
wheel
and
mirrors