Problems with the "Cooling with air dehumidification" function
Problem
Possible causes/consequences and
M
Solutions
The indicator lamp in the
Á
button flashes
three times or remains
off. Cooling with air
dehumidification can
also no longer be activa-
ted using the multimedia
system (see the sepa-
rate operating instruc-
tions).
Cooling with air dehumidification has been deactivated due to a mal-
function.
X
Visit a qualified specialist workshop.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is main-
tained automatically at a constant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
Cabriolet: the system automatically detects
whether the soft top is open or closed and auto-
matically adjusts the climate control settings
depending on the soft top status.
The "Cooling with air dehumidification" function
is activated automatically in automatic mode.
Setting climate control to automatic
X
Turn the SmartKey to position 2 in the ignition
lock (
Y
page 136).
X
Set the desired temperature using the
w
rocker switch.
or
X
Set the desired temperature using the multi-
media system (see the separate operating
instructions).
X
To activate: press the
Ã
rocker switch up
or down.
The indicator lamp in the
Ã
rocker switch
lights up.
X
To switch to manual operation:press the
K
rocker switch up or down.
or
X
Set the airflow using the multimedia system
(see the separate operating instructions).
or
X
Set the airflow using the multimedia system
(see the separate operating instructions).
The indicator lamp in rocker switch
Ã
goes
out.
In automatic mode, if you adjust the airflow or
air distribution manually, the indicator lamp on
the
Ã
rocker switch goes out. The function
which has not been changed manually, however,
continues to be controlled automatically. When
the manually set function switches back to auto-
matic mode, the indicator lamp on the
Ã
rocker switch lights up again.
Adjusting the climate mode settings
In automatic mode you can select the following
airflow settings for the driver's and front-
passenger areas:
FOCUS high airflow, slightly cooler setting
MEDIUM medium airflow, standard setting
DIFFUSE low airflow, slightly warmer and draft-
free setting
X
To set: set the climate mode using the mul-
timedia system (see the separate operating
instructions).
Operating the climate control systems
127
Climate
control
