Mercedes-Benz S 65 AMG, Operator'S Manual

Page: 130 / 616

COMAND navigation system (entering a destination)
128
whether you want to end the current route
guidance.
X Select
Yes
or
No
.
If you select
Yes
, COMAND will stop the
route guidance and start the route
calculation for the new destination.
If you select
No
, COMAND will continue
with the active route guidance.
The new destination is discarded.
During the route calculation, an arrow will
indicate the linear direction to the
destination. Below this, you will see the
message
Calculating Route
.
Once the route has been calculated, route
guidance begins (
Y
page 139).
i Route calculation requires a certain
amount of time. The time depends on the
distance from the destination, for example.
COMAND calculates the route using the
digital map data. The calculated route may
differ from the actual road situation, e.
g.
due to road construction or incomplete
map data. Please make sure that you
observe the notes about the digital map
(
Y
page 100).
Entering a destination from the
destination memory
X Select
Navi
£
Destination
£
From
Memory
.
The destination memory list appears either
with or without the input characters
(
Y
page 129). Whether the input
characters appear depends on the number
of entries in the destination memory.
i
The destination memory always contains
an entry called
My Address
. You can save
your home address, for example, under this
entry (
Y
page 151).
Destination memory list with input
characters
When this list appears, the input characters
4
are automatically activated.
1
Top list entry based on the input data up
to that point
2
Characters entered by the user
3
Characters automatically added by the
system
4
Input characters
5
Currently non-selectable characters
6
Destination memory list
7
Currently selected character
8
Currently selectable characters
i In the list of input characters
4
, you can
only select currently selectable characters.
Which characters are included depends on
the sequence in which you have entered
your destination and the content of the
destination memory.
Control systems