Mercedes-Benz Mercedes-AMG GT4-door coupe, Owner'S Manual

Page: 106 / 489

#
Make sure that when the position of
driver's seat is being adjusted using the
multimedia system, no people or body
parts are in the seat's range of move‐
ment.
If there is a risk of someone becoming trap‐
ped, stop the adjustment process immedi‐
ately:
#
a) Tap the warning message on the
media display.
or
#
b) Press a memory position button or a
seat adjustment switch on the driver's
door.
The adjustment process will be stop‐
ped.
Requirements:
R
Adapting the driver's seat position to body
size: automatic seat adjustment has been
switched on.
Multimedia system:
4
©
5
Settings
5
Vehicle
5
Automatic seat adjustment
Switching automatic seat adjustment on/off
When the active user profile is changed while
the vehicle is stationary, the driver's seat, out‐
side mirror and seat contour will automatically
be adapted to the driver.
#
Select On or Off .
% This setting is available only for individual
user profiles. For the guest profile, auto‐
matic seat adjustment cannot be switched
on or off. Further information about user
profiles .
Adjusting the driver's seat position to body
size
The vehicle will calculate a suitable driver's seat
position on the basis of the driver's body size
and set this directly.
#
To set the unit of measurement: select cm
or ft/in .
#
Set the size using the scale.
#
Select Start positioning .
The driver's seat position will be adjusted to
the body size that has been set.
% If the driver's seat position calculated by the
vehicle is not practical or comfortable, it can
be changed manually at any time via the but‐
tons.
The exterior mirrors are not set via this func‐
tion. Instead, they have to be set manually
via the switches.
% You can also configure these settings via the
Mercedes me portal for your user profile. By
synchronising the profiles in the vehicle and
the Mercedes me connect profiles, you can
carry over these settings for your vehicle.
Further information about synchronising
user profiles .
Setting the easy entry and exit feature
#
Switch the function on or off.
% If you use an individual user profile and have
set your body size, this information is carried
over for the easy entry and exit feature. This
causes the driver's seat to automatically
move into the correct position .
Seats and stowing 103