Mercedes-Benz M-class ML 320 Operator'S Manual Download Page 83

Page: 83 / 317

Instrument cluster

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Activating instrument cluster display

The display for temperature, odometer, oil level
indicator and clock is activated by:

•

Opening the driver’s door.

•

Pressing button (1) in the instrument cluster (with
key removed or in steering lock position 0).

•

Turning the key in steering lock to position 1 or 2.

Display illumination

Rotate knob (1) to vary intensity of instrument lamps:

•

Clockwise - instrument lamp intensity increases.

•

Counterclockwise - instrument lamp intensity
decreases.

Odometer/trip odometer

Activate the instrument cluster.

•

Press knob (1) once to switch to or from odometer to
trip odometer readout.

•

Press and hold knob (1) for more than 1 second to
reset trip odometer (with trip odometer displayed).

•

Press knob (1) twice to display next scheduled
service.

Clock

Adjusting clock (instrument cluster activated):

Minute: Pull out knob (2) and turn it to the right.

Hour: Pull out knob (2) and turn it to the left.

Ofrecido por www.electromanuales.com

Summary of Contents for M-class ML 320






























































































































































































































































































































Search results

Summary of Contents for M-class ML 320

Reviews:

Related manuals for M-class ML 320

Brands by name

Popular brands

Mercedes-Benz M-class ML 320, Operator'S Manual

Search results

Summary of Contents for M-class ML 320

Reviews:

Related manuals for M-class ML 320

Brands by name

Popular brands