X
Slide cover
:
of positive terminal
;
in
the direction of the arrow.
X
Connect positive terminal
;
on your vehi-
cle to positive terminal
=
of donor battery
B
using the jump lead, beginning with your
own battery.
X
Start the engine of the donor vehicle and
run it at idling speed.
X
Connect negative terminal
?
of donor bat-
tery
B
to earth point
A
of your vehicle
using the jump lead, connecting the jump
lead to donor battery
B
first.
X
Start the engine.
X
First, remove the jump lead from earth
point
A
and negative terminal
?
, then
from positive terminal
;
and positive ter-
minal
=
, each time disconnecting from the
battery on your own vehicle first.
X
Have the battery checked at a qualified
specialist workshop, e.g. a Mercedes-Benz
Service Centre.
Towing and tow-starting
Points to remember
G
Risk of accident
If you have the vehicle towed, you must use a
rigid towing bar if:
R
the engine is not running.
R
there is a brake system malfunction.
R
there is a malfunction in the voltage supply
or the vehicle's electrical system.
The power steering and the brake force boos-
ter do not work when the engine is not run-
ning. Then, greater braking force will be
required and brake pedal travel will be longer.
If necessary, depress the brake pedal with full
force.
Do not tow the vehicle if the key cannot be
turned in the ignition lock. If this is the case,
the steering is locked and the vehicle cannot
be steered.
If you tow or tow-start another vehicle, its
weight must not exceed the maximum per-
missible gross vehicle weight of your vehicle.
It is better to have the vehicle transported
than to have it towed.
236
Towing and tow-starting
Prac
tic
al
advi
ce
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 236
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
