lar
:
and the lashing eyelets* in the foot-
well of the rear seat (
Y
page 133) are
required for tightening the net.
You can only use the safety net in position
1 if there are lashing eyelets* in the foot-
well of the rear seat.
R
Position 2 behind the rear seat: the
retainers behind C-pillar
;
and the lashing
eyelets in the luggage compartment are
required for tightening the net
(
Y
page 133).
Preparing the safety net
The safety net is located in the loading tray in
the stowage well under the luggage compart-
ment floor (
Y
page 136).
X
Open both Velcro fasteners and remove the
safety net.
X
Unroll and unfold the safety net.
The upper and lower guide rods must
engage audibly.
Attaching the safety net
Guide rod inserted behind the C-pillar
X
Insert guide rod
;
into retainer
:
in the
direction of the arrow.
X
Slide guide rod
;
forwards into
retainer
:
in the direction of the arrow.
Tightening the safety net
Seat belt reel holder behind the front seats
X
Insert belt hook
:
into lashing eyelet
;
in the direction of the arrow.
X
Pull tensioning strap
=
by the loose end in
the direction of the arrow until the safety
net is tight.
X
After driving a short distance, check the
tension of the safety net and retighten it if
necessary.
Releasing the safety net
Seat belt reel holder behind the front seats
X
Pull belt adjuster
:
upwards in the direc-
tion of the arrow to reduce the tension on
the tensioning strap.
X
Unhook belt hook
;
from lashing eyelet
=
.
Loading and stowing
135
Contr
ols
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 135
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
