Mercedes-Benz GLE 350 4MATIC 2020, Operator'S Manual

Page: 63 / 650

#
If necessary, slide head restraint 1 upwards
(
/
page 105).
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
#
Guide Top Tether belt 5 under head
restraint 1 between the two head restraint
bars.
#
If cargo compartment cover 3 is installed,
guide Top Tether belt 5 downwards
between cargo compartment cover 3 and
seat backrest 2 .
#
Hook Top Tether hook 6 of Top Tether belt
5 into Top Tether anchorage 4 without
twisting.
#
Tension Top Tether belt 5 . Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
#
If necessary, slide head restraint 1 down‐
wards (
/
page 105). Make sure that you do
not interfere with the correct routing of Top
Tether belt 5 .
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
& WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
R
If this is the case, the vehicle occupant
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
R
Objects or loads in the trunk/cargo com‐
partment cannot be restrained by the
seat backrest.
Occupant safety 61