The engine is switched off automatically in the
following situations if all vehicle conditions for
an automatic engine stop are met:
R
You brake the vehicle to a standstill in trans‐
mission position
h
or
i
.
if you switch on the HOLD function in transmis‐
sion position
h
or
i
, the engine will automati‐
cally stop in the following situations:
R
you stop behind a vehicle that is pulling
away.
R
you stop at a stop sign when there is no vehi‐
cle in front of you.
R
you turn the steering wheel hard at a low
speed.
%
In transmission position
k
, the engine is
not switched off automatically even when
the HOLD function is switched on.
The engine is restarted automatically if:
R
You release the brake pedal in transmission
position
h
when the HOLD function is not
active.
R
You engage transmission position
h
or
k
.
R
You depress the accelerator pedal.
R
An automatic engine start is necessary.
ECO start/stop function symbols in the multi‐
function display:
R
The
è
symbol (green) appears when the
vehicle is at a standstill: the engine was
switched off by the ECO start/stop function.
R
The
ç
symbol (yellow) appears when the
vehicle is at a standstill: not all vehicle condi‐
tions for an engine stop have been met.
R
Neither the
è
nor
ç
symbol appears
when the vehicle is at a standstill: an intelli‐
gent stop inhibitor was detected, e.g. a stop
sign.
R
The
è
OFF symbol appears: the ECO
start/stop function is deactivated or there is
a malfunction.
%
If, in spite of an intelligent stop inhibitor, the
engine should be switched off by the ECO
start/stop function, you have the following
options:
R
Switch on the HOLD function in transmis‐
sion position
h
or
i
.
R
You engage transmission position
j
.
If the engine was switched off by the ECO start/
stop function and you leave the vehicle, a warn‐
ing tone sounds and the engine is not restarted.
The
Vehicle Ready to Drive Switch the Ignition
Off Before Exiting
display message also appears
in the multifunction display. If you do not switch
off the ignition, the ignition is automatically
switched off after three minutes.
Vehicles with a 48 V on-board electrical sys‐
tem (EQ Boost technology)
%
The ECO start/stop function is available only
in the
C
,
A
,
;
,
N
and
=
drive programs (depending on the setting).
The engine is switched off automatically in the
following situations if all vehicle conditions for
an automatic engine stop are met:
R
You brake the vehicle to a standstill in trans‐
mission position
h
or
i
.
R
You depress the brake pedal when traveling
at a low speed.
172 Driving and parking
Summary of Contents for GLE 350 4MATIC 2020
