Example: turn signal lamp with protection grille
X
Switch off the lights.
X
Pull protection grille
:
in the direction of
the arrow out of mounting
;
.
X
Fold up protection grille
:
.
X
Switch off the lights.
X
Unscrew screws
:
.
X
Remove lens
;
.
X
Turn bulb
=
anti-clockwise, applying slight
pressure, and remove it from the bulb
holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
X
Fit lens
;
.
X
Replace and tighten screws
:
.
X
Fold down protective grid
:
and engage it
in anchorage
;
.
Additional turn signal lamp
Chassis cab
!
When fitting the lens, make sure that the
seal is positioned correctly.
!
Do not fasten the screws too tightly. You
could otherwise damage the lens.
Example: chassis cab
X
Switch off the lights.
X
Unscrew screws
:
.
X
Remove lens
;
.
68
Replacing bulbs
Lights and windscreen wipers
Summary of Contents for G-Class
