14
Attach the Steering Column
2
i
19
H
G
D
C
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Hole in the
front axle linkage
Front Bottom View
Steering Gear Box
Turn the vehicle body on its side. Remove the
M5x22 machine screw (H)
and
Ø5
nut (G)
from the
R/C driver (i)
with a screwdriver
1.
Attach the
R/C driver (i)
to the
steering gear box
, and make it match with the
steering gear box.
2.
Insert the
straight end
of the
steering column (19)
up through the hole in the
steering gear box
from the bottom side, and out through the hole in the dash
through the top.
3.
Line up the holes in the
R/C driver (i)
and find the hole in the
steering column
(19),
tighten a
M5x22 machine screw (H)
and
Ø5 nut (G)
back in the same
location with a screwdriver.
4.
Insert the
bent end
of
steering column (19)
through the hole in the
front axle
linkage.
5.
fit a
Ø10 washer (D)
to the
bent end
of the
steering column (19).
6.
Insert a
split pin (C)
into the hole in the
steering column
, bend the ends of the
split pin (C)
back using
long nose pliers
(not included)
.
