12
Attach the Rear Axle
10
Remove all the parts from the
rear axle (10)
1.
Insert the
rear axle (10)
into the hole near the rear vehicle.
1.
Slide the
gear box (1)
onto the
rear axle (10)
. “
R” labeled gear box should be fit to
the “R” side of the vehicle body; “L” labeled gear box should be fit to the “L” side of vehicle
body
. Push the
gear box (1)
and
connector
on the gear box through the large hole
on the rear vehicle and out where the battery sits.
2.
Slide the
driving wheel (2)
onto the rear axle. And keep the
driving wheel (2)
match with the
gear box (1).
3.
Slide the
Ø12 washer (3)
onto the
rear axle (10).
4.
Tighten a
lock nut (24)
to the end of the
rear axle (10)
with a spanner.
- Repeat the above procedure to assemble the other driving wheel. -
5.
Fit the
hubcaps (8)
to the wheel cover.
Attach the Rear Wheels
1
2
3
24
8
Driving Wheel
Rear axle (10)
