Mercedes-Benz G 550 2015, Operator'S Manual

Page: 218 / 274

i
When re-installing trim panel
?
, make
sure that retainer
A
engages in recess
B
.
Removing the spare wheel
The spare wheel is heavy. Take particular note
of this when removing the spare wheel.
X
Remove wheel nuts
:
.
X
Remove the spare wheel.
Mounting the wheel
After changing a wheel:
X
Repair or replace the damaged wheel as
soon as possible and secure the spare
wheel in place again.
X
Secure the damaged wheel on the spare
wheel bracket with wheel nuts
:
. When
doing so, make sure that the wheel cannot
come loose.
X
When re-installing trim panel
?
, make sure
that retainer
B
engages in recess
A
(
Y
page 215).
X
Make sure that tab
;
is below when re-
installing cover ring
:
(
Y
page 215).
X
For safety reasons, regularly check to
ensure that the wheel is securely fastened.
Flat tire
Preparing the vehicle
X
Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.
X
Switch on the hazard warning lamps
(
Y
page 90).
X
Apply the parking brake.
X
Bring the front wheels into the straight-
ahead position.
X
Move the selector lever to position P .
X
Switch off the engine.
X
Remove the SmartKey from the ignition
lock.
The steering wheel lock stays active for as
long as the SmartKey is removed.
X
All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.
X
Make sure that no one is near the danger
area while a wheel is being changed. Any-
one who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
X
Get out of the vehicle. Pay attention to traf-
fic conditions when doing so.
X
Close the driver's door.
Battery (vehicle)
Important safety notes
Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installation. You should there-
fore have all work involving the battery car-
ried out at a qualified specialist workshop.
216
Battery (vehicle)
Road
side
Assistance