Mercedes-Benz G 550 2015, Operator'S Manual

Page: 184 / 274

accept the terms of use when the vehicle is
stationary.
i
Internet pages cannot be shown on the
driver's side while the vehicle is in motion.
Connection difficulties while the vehi-
cle is in motion (Canada only)
The following could be the cause of call dis-
connection:
R
insufficient GSM/UMTS network coverage
R
the vehicle has moved into a GSM cell with
no free channels
R
the SIM card used is not compatible with
the network available
R
you are using a mobile phone with "Twin-
card" and the mobile phone with the sec-
ond SIM card is logged into the network at
the same time
Function restrictions (Canada only)
You will not be able to use the mobile phone,
will no longer be able to use the mobile phone,
or you may have to wait before using it, in the
following situations:
R
when the mobile phone is switched off
R
if the Bluetooth ® function is switched off in
COMAND
R
if the Bluetooth
®
function is switched off on
the mobile phone while you are using Blue-
tooth ® interface telephony
R
if the mobile phone has not logged on to a
mobile phone network
R
if neither the mobile phone network nor the
mobile phone allow simultaneous use of a
phone and an Internet connection
i
It is possible that you may not be able to
receive calls when an Internet connection
is active. This depends on the mobile phone
and the mobile phone network used.
Roaming (Canada only)
When you are driving your vehicle in a differ-
ent country and using COMAND and Internet
functions, additional costs may be incurred
(roaming fees). When you are in a different
country, your SIM card must be enabled for
data roaming. If your mobile phone network
provider does not have a data roaming agree-
ment with the roaming partner, it may not be
possible to establish an Internet connection.
Deactivate this function on your mobile
phone if you want to avoid data roaming when
you are in a different country.
Setting access data (Canada only)
Introduction
To use online and Internet functions, you
need Internet access data for the connected
mobile phone. You can obtain this from your
mobile phone network provider.
A selected/manually set mobile phone net-
work provider is only valid for the mobile
phone connected when the selection/setting
is made. The mobile phone network provider
is set automatically upon reconnection.
i
When you are driving your vehicle in a dif-
ferent country and using the online and
Internet functions on COMAND, you may
incur additional costs (roaming fees).
i
While initializing the mobile phone for the
Internet connection, access data which is
already on the mobile phone may be over-
written. You should therefore check the
settings on the mobile phone (see the
mobile phone operating instructions).
i
Adjust the access data settings when the
vehicle is stationary. You may otherwise be
distracted from the traffic conditions,
cause an accident and injure yourself and
others.
182
Online and Internet functions
COMAN
D