Mercedes-Benz Energy Storage Home, Manual, Page: 19 / 28

4
2
1
3
3
4.5 System cover
(1) Insert the RJ45 ribbon cable into the RJ45 connection
socket inside the system cover.
(2) Place the system cover on top of the upper energy
storagemodule,runningtheHVcable(25 mm²,positive
terminal) and the protective earth through the left-hand
slotinthesystemcoverandtheHVcable(25 mm²,
negative terminal) through the right-hand slot.
(3) Use the expanding rivets to fasten the system cover
to the right- and left-hand sides of the energy storage
module.
•Systemcovernowmounted.
(4) Insert the RJ45 cable for communication with the inverter
into the RJ45 connection socket on top of the system
cover.
•Communicationlinkwiththeinverternowconnected.
1
2
3
4
4
(1) Insert the groove on the trunking cover base into the
tongue on the base.
(2) Press the trunking cover onto the base.
(3)Usethehexkey(3 mm)toscrewthetrunkingcovertight.
(4) Repeat the process to attach the energy storage module
trunking cover to the energy storage module.
(5) Repeat the process on both sides of the Mercedes-Benz
Energy Storage Home modules until all trunking covers
have been mounted.
•Trunkingcoversnowmounted.
4.6 Trunking cover
In the case of wall assembly, start with the initial energy
storage module as there is no base used.
19 Mercedes-Benz Energy Storage Home Manual | Installation