Mercedes-Benz E 500, Owner'S Manual

Page: 35 / 140

E
Storing seat/head restraint/
steering wheel positions in
memory (if so equipped):
D Memory button.
E Position buttons ” 1 ” and ” 2 ” .
Two sets of seat/head restraint/
steering wheel positions may be
programmed into memory. After
the seat/head restraint/steering
wheel are positioned, push me­
mory button D, release, and within
3 seconds push position button
” 1” . A second set of positions for
the same seat/head restraint/
steering wheel can be program­
med into memory by pushing first
button D and then ” 2 ” .
Recalling seat/head restraint/
steering wheel positions stored in
memory:
To recall a seat/head restraint/
steering wheel position, push
position button ” 1” or ” 2 ” until
seat/head restraint/steering wheel
movement has stopped. For safety
reasons, the seat/head restraint/
steering wheel movement stops
after releasing the position button.
Note:
See Index for instructions on
adjusting telescopic steering
column.
Caution!
Do not remove head restraints
except when mounting seat cov­
ers. For removal and installation
refer to Head Restraints, Removal
in Index. Whenever restraints have
been removed be sure to reinstall
them before driving.
Coupe: For safety, when the doors
are closed and the engine is run­
ning the backrests are mechani­
cally locked by vacuum actuators.
The locks can be released by
pushing the button (5, arrow).
When the doors are open, the
backrests can be folded forward
without pushing the button.
33
O
p
e
ra
ti
o
n