Mercedes-Benz E 350, Operator'S Manual

Page: 367 / 521

366
Operation
Vehicle care
Cleaning the Distronic* system sensor
cover
1
Distronic system sensor cover
왘
Switch off the ignition (
컄
page 36).
왘
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a
non-scratching cloth to clean sensor
cover
1
.
왘
Restart the engine after cleaning sen-
sor cover
1
.
Cleaning the windows and the wiper
blades
왘
Switch on the ignition (
컄
page 36).
왘
Turn combination switch to wiper
setting
II
(
컄
page 55).
왘
With wiper arms in vertical position,
switch off the ignition (
컄
page 61).
왘
Fold the wiper arms forward until they
snap into place.
왘
Clean the wiper blade inserts with a
clean cloth and detergent solution.
왘
Use a soft, clean cloth and a mild win-
dow cleaning solution on all outside
and inside glass surfaces.
An automotive glass cleaner is recom-
mended.
!
To prevent scratches or damage, never
apply strong force and only use a soft,
non-scratching cloth when cleaning the
sensor cover
1
. Do not attempt to
wipe dirty sensors with a dry cloth or
sponge.
!
The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.
Never open the hood when the wiper
arms are folded forward.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0 ) before cleaning the windshield the
windshield and/or the wiper blades. Other-
wise, the wiper motor could suddenly turn
on and cause injury.