Mercedes-Benz E 350, Operator'S Manual

Page: 174 / 521

173
Controls in detail
Control system
왘
Press button
æ
or
ç
to select
manual operation ( manual ) or daytime
running lamp mode ( constant ) activat-
ed.
With daytime running lamp mode activated
and the exterior lamp switch at
position
M
or
U
, the low beam
headlamps are switched on when the en-
gine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
컄
page 143).
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position
U
, the following lamps will
switch on during darkness when the vehi-
cle is unlocked using button
Œ
on the
SmartKey or SmartKey with
KEYLESS-GO*:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
앫
Front fog lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
i
For safety reasons, resetting the
Lighting submenu to factory settings
while driving (
컄
page 166) will not de-
activate the daytime running lamp
mode.
The following message appears in the
multifunction display:
Lighting - Can-
not be completely reset to factory
settings while driving.
컄컄