Mercedes-Benz Citan 2015, Operating Instructions Manual

Page: 94 / 216

Heating control panel
:
Switches air-recirculation mode on/off (
Y
page 100)
;
Sets the airflow (
Y
page 97)
=
Sets the temperature (
Y
page 96)
?
Turns rear window heating on/off (depending on the vehicle) (
Y
page 98)
Turns mirror heating on/off (depending on the vehicle)
A
Sets the air distribution (
Y
page 97)
Notes on using the heating
Heating
Below, you can find a number of notes and rec-
ommendations to help you use the heating opti-
mally.
R
Switch on the air-conditioning system by turn-
ing control knob
;
clockwise to the desired
position (except position 0).
R
Only change the temperature in small incre-
ments.
To increase or decrease the temperature, turn
control knob
=
in a clockwise or anti-clock-
wise direction.
R
Recommendation to avoid misting of the
windows in the event of low outside tem-
peratures or rain: switch on the air distribu-
tion
z
. Deactivate air-recirculation mode
ø
. Set airflow control
;
to level 3 or 4.
R
Recommendation for rapid heating of the
vehicle interior: briefly set airflow control
knob
;
to position 3 or 4.
R
Recommendation for a constant vehicle
interior temperature: set airflow control
knob
;
to position 1 or 2.
R
Recommended air distribution setting for
winter months: select setting
a
.
Recommended air distribution setting for
summer months: select setting
S
.
R
Only use the demisting function briefly, until
the windscreen is clear again.
R
Only use air-recirculation mode briefly, e.g. if
there are unpleasant outside odours or when
in a tunnel. The windows could otherwise mist
up as no fresh air is drawn into the vehicle in
air-recirculation mode.
ECO start/stop function
During automatic engine switch-off of the ECO
start/stop function, the heater only operates at
reduced output. If you require full heater output,
the ECO start/stop function can be deactivated
by pressing the ECO OFF button (
Y
page 105).
92
Overview of climate control systems
Climate control