background image

  

15 

ANTITHEFT SYSTEM 

The Mercedes-Benz AM and FM 
stereo radio with cassette player 
and CD compatibility is fitted with a 
built-in system designed to help 
render it inoperative in case of 
theft. If the radio or battery is dis-
connected, the radio will be 
automatically disabled. To indicate 
this state, the word 

CODE

 will 

appear on the radio's display. To 
render the radio operable again, 
the correct four-digit code must be 
entered into the radio via its 
numbered station recall buttons. A 
code is preassigned to each radio 
and supplied to the owner on two 
wallet--sized cards. 
 

Recoding Sequence:

 To recode a 

radio, follow this procedure: 1. 
Turn ignition key to lock position 
one. 2. Turn on the radio. The 
word CODE appears on the 
display. 3. Enter 

the first digit of 

the radio's antitheft code as it 
appears on the code card. The 
word CODE will disappear and the 
first number that you have entered 

  will be displayed. 4. Enter the rest of 

the antitheft code. Each number will 
be displayed when it is keyed in. 5. 
When all four antitheft code numbers 
have been correctly entered, radio 
operation will resume. The station 
stored at push-button 1 FM will play. 
 

Incorrect Code:

 If an incorrect 

antitheft code digit is entered, 
continue to enter numbers until four 
are displayed. The word 

CODE

 will 

appear again. The system allows 
two more recoding attempts. After 
the third incorrect attempt, the word 

WAIT

 is displayed. A period of 15 

minutes must pass and the word 

CODE

 must again be displayed 

before recoding can be successful. 
The radio must be left on during this 
period. This measure is meant to 
prevent a thief from recoding the 
radio by randomly entering numbers. 
If the correct antitheft code has not 
been entered after three separate  
attempts-and therefore after two 
15minute wait intervals - the radio 
will lock for 24 hours to prevent 

  any further recoding attempts. The 

radio must be left on during this 
period in order for it to re-enter the 
code mode. 
CODE CARDS SHOULD NOT BE 
STORED IN THE GLOVE 
COMPARTMENT. During vehicle 
service at an authorized Mercedes-
Benz dealer, we recommend that 
you leave one card with your 
service advisor. Thus, if the battery 
is disconnected, the service 
advisor can recode the radio before 
the car is returned to you. 
If the car is equipped with a 
Mercedes-Benz antitheft alarm 
system, the alarm will sound 
should the radio be removed from 
the console while the alarm system 
is armed. If you have difficulty 
reprogramming the radio or if the 
reprogramming function fails to 
operate, please contact your 
authorized Mercedes-Benz dealer. 

 

Summary of Contents for Car receiver
















Reviews: