Mercedes-Benz C 250 Coupe, Operator'S Manual

Page: 203 / 336

Display messages
General notes
G
WARNING
All categories of messages contain important information which should be taken note of and,
where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz
Center.
Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz
Limited Warranty, or result in property damage or personal injury.
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in
this Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When you stop and park the vehicle, please observe the notes on the HOLD function
(
Y
page 159) and parking (
Y
page 140).
Hiding display messages
You can hide some display messages with a low priority.
X
Press the
a
or
%
button on the steering wheel to hide the display message.
The display message is cleared.
Display messages with a high priority are shown in red.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages continuously until the causes for the messages have been remedied.
Message memory
The message memory allows you to call up previous display messages.
X
Press
=
or
;
on the steering wheel to select the
Serv.
menu.
If there are display messages, the multifunction display shows
2 Messages
, for example.
X
Press the
9
or
:
button to select the entry, e.g.
2 Messages
.
X
Confirm with
a
.
X
Press the
9
or
:
button to scroll through the display messages.
When the ignition is switched off, all display messages are deleted apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
Display messages
201
On-board computer and displays
Z