Mercedes-Benz AMG GT R 2018, Owner'S Manual

Page: 314 / 409

* NOTE Engine damage caused by an
incorrect oil filter, incorrect oil or addi‐
tives
#
Do not use engine oils or oil filters
which do not correspond to the specifi‐
cations explicitly prescribed for the
service intervals.
#
Do not alter the engine oil or oil filter in
order to achieve longer change intervals
than prescribed.
#
Do not use additives.
#
Have the engine oil renewed at regular
intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Only Mercedes-Benz approved engine oils may
be used in Mercedes-Benz engines.
Further information on engine oil and oil filters is
available at the following locations:
R
in the Mercedes-Benz Specifications for
Operating Fluids by entering the designation
-
at http://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo app
R
at a qualified specialist workshop
Petrol engines: for certain countries, different
engine oils can be used in conjunction with
reduced maintenance intervals.
% Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Petrol engines MB-Freigabe or MB-
Approval
All models 229.5, 229.51
If the engine oils listed in the table are not avail‐
able, you may add a maximum of 1.0 litre of the
following engine oils once only.
To be used once only when the engine oil is not
available:
R
MB-Freigabe or MB-Approval 229.1
R
Only use SAE 0W-40 or SAE 5W-40 viscosity
class engine oils
The following values refer to an oil change,
including the oil filter.
Replacement amount
Model Replacement
amount
All models 7.0 litres
Notes on brake fluid
Observe the notes on operating fluids
(
/
page 307).
& WARNING Risk of an accident due to
vapour pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapour pockets may form in the brake sys‐
tem when the brakes are applied hard.
Technical data 311