#
Release the previously pressed button.
Indicator lamp
1
continues to flash yellow.
#
Point remote control
5
from a distance of
1 cm to 8 cm towards buttons
2
,
3
or
4
.
#
Press and hold button
6
of remote control
5
until:
R
Indicator lamp
1
lights up green contin‐
uously. Programming is complete.
R
Indicator lamp
1
flashes green. Pro‐
gramming was successful. Additionally,
synchronisation of the rolling code with
the door system must also be carried out.
#
If indicator lamp
1
does not light up or flash
green: repeat the procedure.
#
Release all of the buttons.
%
The remote control for the door drive is not
included in the scope of delivery of the
garage door opener.
Synchronising the rolling code
Requirements:
R
The door system uses a rolling code.
R
The vehicle must be within range of the
garage door or door drive.
R
The vehicle as well as persons and objects,
are located outside the range of movement
of the door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button
2
,
3
or
4
repeatedly until the door closes.
When the door closes, programming is com‐
pleted.
%
Please also read the operating instructions
for the door drive.
Troubleshooting when programming the
remote control
Driving and parking 129
Summary of Contents for AMG GT R 2018
