Mercedes-Benz A 220 4MATIC 2021, Operator'S Manual

Page: 60 / 426

Contact with the roof when the head
restraint is fully extended and locked in
place will not result in any restrictions on
use.
O
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the
wrong direction. Where possible, adjust the
seat cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints as appropriate.
1 LATCH-type (ISOFIX) mounting bracket
Before every journey, make sure that the LATCH-
type (ISOFIX) child restraint system is engaged
correctly in both mounting brackets in the vehi‐
cle.
* NOTE Damage to the seat belt for the
center seat during installation of the
child restraint system
#
Make sure that the seat belt is not trap‐
ped.
#
Attach the LATCH-type (ISOFIX) child
restraint system to both mounting brackets
in the vehicle.
Securing Top Tether
&
WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no
longer be able to perform their intended pro‐
tective function. This may also cause addi‐
tional injuries.
58 Occupant safety