Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow
1
.
When the high beam is activated, the
L
indicator lamp for low beam will be deactiva‐
ted and replaced by the
K
indicator lamp
for high beam.
Switching off high beam
#
Push the combination switch in the direction
of arrow
1
or pull it in the direction of arrow
3
.
High-beam flasher
#
Pull the combination switch in the direction
of arrow
3
.
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow
2
or
4
.
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combi‐
nation switch beyond the point of resistance
in the direction of arrow
2
or
4
.
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Activating/deactivating the hazard warning
lights
#
Press button
1
.
The hazard warning lights will switch on auto‐
matically if:
R
The airbag has been deployed.
Light and visibility 111
Summary of Contents for A 220 4MATIC 2021
