Mercedes-Benz 280 CE 1979, Owner'S Manual

Page: 64 / 83

Electrical System
11 Securing screws for sealed-
beam unit retaining ring.
Loosen securing screws, re­
move retaining ring and unit.
Pull off connector.
12 Securing screws for fog light
retaining ring. Loosen securing
screws and take out light body.
Pull off plug (13). Disengage
retaining spring and remove
bulb (14).
15 Bulb for turn signal, clearance
(standing) and side marker
light. Loosen fastener (6). Push
light body forward and detach.
Hold lamp holder by the wide
lug and pull out. Depress bulb,
turn to the left and take out.
When installing the bulb holder,
the lugs must engage the light
body recesses. When installing
the light body, never fail to
engage the locating webs (16)
between the retaining springs
(17).
Tail Light Assembly
Remove both knurled nuts in the
trunk and pull off lens assembly.
To replace the bulbs, depress, turn
left and pull out.
1 Turn signal light
side marker light
2 Standing lig h t/ta il light
3 Stop light
4 Back up light
(
63