Seats
)
Safety Belts
Warning system:
The indicator marked “ FASTEN
SEAT BELTS” is illuminated for 4—8
seconds after turning the steering
lock key to position “ 2” . If the safety
belt of the driver’s seat is not
fastened a warning buzzer sounds
simultaneously.
Fastening of front and outer rear
seat belts (with inertia reel):
• Pull belt with tongue (1) across
shoulder and lap. The belt must
not be twisted and must be tight.
• Press tongue (1) into buckle (2)
and allow to engage audibly.
Unfastening, front and rear:
• Depress red button “ PRESS” (3)
in buckle (2).
• Return tongue (1) to initial
position.
Fastening of rear center seat belt
(without inertia reel):
• Pull belt across the lap. It must
not be twisted and must be tight.
• Press tongue into, buckle and
allow to engage audibly.
Adjustment of rear center seat belt:
To lengthen, turn belt buckle (on
LH side of belt) to be at right angles
to the belt and pull the tongue.
To shorten, pull loose end of belt.
8759
16
Summary of Contents for 280 CE 1979
