Mercedes-Benz 280 CE 1979, Owner'S Manual

Page: 56 / 83

Practical Hints
Rear Seat Cushion
Removal: Depress buttons 1 (left
and right) and at the same time
slightly lift up rear seat cushion at
the front end. Then pull the cushion
forward. (Center arm rest of rear
seat cushion must be folded up.)
Installation: Push rear edge of rear
seat cushion under the backrest
to the stop, press down front edge
onto the support and allow to
engage.
Spare Wheel, Jack, Vehicle Tool Kit Luggage or Ski Racks
Spare wheel (1), jack (2) and the
tool kit are stowed in a trough be­
low the trunk floor.
Fold back trunk floor mat and
remove cover plate.
Note:
The jack is designed exclusively
for jacking up the vehicle at the
jack tubes provided on either side
of the vehicle. Jack stands must be
used when working under the
vehicle.
The only type of rack to be
mounted on the roof we recommend
is the drip rail mounted type which
has no other supports (suction
cups or legs) to support the rack
on the roof. Such supports may
lead to marring of the paint or even
denting of the roof if excessive
weight is placed on the rack.
Your MERCEDES-BENZ dealer can
give further advice.
i
55